Edwards RV3 Rotary Vane Vacuum Pump 115v-220v, Factory Set to 115V

Description

Used: Like New (very good condition). Factory set to 115V
Includes: Edwards RV3 Rotary Vane Vacuum Pump, 1L of Ultragrade 19 Vacuum Oil, and Power Cable
Overview
The RV series of small oil sealed rotary vane pumps deliver excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. With over 300,000 units produced, these pumps offer proven performance that sets the industry standard for R&D and scientific pumping applications.
All RV pumps are approved to UL and CSA standards by an external test house and feature our unique mode selector switch, meaning one model is suitable for both high vacuum or high throughput applications. In summary, you can rest assured that when you choose an Edwards RV oil sealed rotary vane pump you are choosing a product you can rely on from a company you can trust.
Technology
All our RV pumps are significantly quieter – noise levels of 48 dBA 50Hz are typically half the noise of a conventional pump and have been achieved by extensive work on the drive train and motor.
The pumps have the unique ability to deliver excellent ultimate vacuum in both high vacuum and high throughput modes with or without gas ballast. This gives the user an unrivalled opportunity to select the optimum pumping performance without compromising the application.
In its high vacuum mode, the RV pump is ideal for analytical instruments, electron microscopes, physics research, backing turbo pumps and leak detection applications. Configure the same pump in the high throughput mode, and it becomes suitable for distillation, laboratory furnaces, backing vapor pumps, solvent concentration, freeze drying and other drying applications.
The simple to use mode selector and accessible, three-position gas ballast control allow the pump to be reconfigured at any time, even when the pump is running.
Applications
Analytical instruments
Laboratory bench top vacuum
Turbomolecuar backing pumps
Freeze drying
Research and development
Centrifuges, ultra-high speed
Coating
Degassing/curing - oil, epoxy resin
Distillation/extraction/filtration
Furnaces
Gas bottle filling/emptying
Gel drying
Glove boxes, ovens
Leak detectors, Helium
Load locks and transfer chambers
Refrigeration manufacture
Rotary, centirfugal evaporators
Scanning electron microscopes - SEM
SEM/FIB (ion beam repair)
Solvent recovery
Surface science instruments
Features and benefits
High reliability
– generous lubrication of moving parts.
Safe process and systems
– fast acting inlet valve for best in class anti‑suck back protection.
Configured to meet your vacuum needs
– mode selector and two position gas ballast.
No unplanned downtime
– designed for easy maintenance.
Better work environment
– quiet running and intrusive frequencies minimised.
Two position gas ballast
allows either 60 g/hr or a class leading 220 g/hr (290 g/hr on RV12) of water vapour to be handled.
Universal motor
to cover the widest possible voltage and frequency range from a single variant.
Smooth controlled inlet valve opening
by oil pressure to eliminate pressure surges.
Rapid closing inlet valve
within 0.4 seconds of pump stopping.
Technical Data
Displacement
50Hz
3.7 m
3
h
-1
/ 2.2 ft
3
min
-1
60Hz
4.5 m
3
h
-1
/ 2.6 ft
3
min
-1
Speed (Pneurop 6602)
50Hz
3.3 m
3
h
-1
/ 2 ft
3
min
-1
60Hz
3.9 m
3
h
-1
/ 2.3 ft
3
min
-1
Ultimate pressure
2.0 x 10
-3
mbar / 1.5 x 10
-3
Torr
Ultimate pressure GB I
3.0 x 10
-2
mbar / 2.3 x 10
-2
Torr
Ultimate pressure GB II
1.2 x 10
-1
mbar / 9.1 x 10
-2
Torr
Ultimate Pressure with Fomblin®
2 x 10
-2
mbar / 1.5 x 10
-2
Torr
Max inlet pressure for water vapour
80 mbar / 60 Torr
Max water vapour pumping rate – GB I
60 gh
-1
Max water vapour pumping rate – GB II
220 gh
-1
Max allowed outlet pressure
0.2 bar gauge / 2.8 psig
Max allowed inlet and gas ballast pressure
0.5 bar gauge / 7 psig
Motor power 50/60Hz
450 / 550W
Power connector 1-ph
IEC EN60320 C13
Nominal rotation speed 50/60Hz
1500 / 1800rpm
Weight (without oil)
25 kg / 55 lb
Oil capacity min/max
0.42/0.7 litres
Recommended oil
Ultragrade 19
Inlet flange
NW25
Exhaust flange
NW25
Noise level
48 dB(A) @ 50 Hz
Operating temperature range
12 – 40 °C
RV Series Vacuum Pumps Datasheet and Manual
Datasheet:
https://shop.edwardsvacuum.com/Viewers/Document.ashx?id=1654&lcid=2057
Manual:
https://shop.edwardsvacuum.com/Viewers/Document.ashx?id=1325&lcid=2057