Precision Scientific Model D75 (Oil Removed) Belt Drive Vacuum Pump

Description

This is a
Precision Scientific Model D75 (Oil Removed) Belt Drive Vacuum Pump
.
What you will get:
Precision Scientific Model D75 (Oil Removed) Belt Drive Vacuum Pump
Switch (Allen Bradley), attached to the power cord
Printout of the manual
This is my item 292.  This pump was purchased from a lab.  The oil was drained when the pump was decommissioned.  I have not personally tested this unit, however, I do stand behind my items and if you have trouble, I will be sure that you are well taken care of.
You will need 1 quart of pump oil to fire this up.  If you start it without oil, I will not warranty the unit.
More Information:
Precision D75
rotary vane pumps have a pumping speed of 2.6 cfm and a ultimate pressure of 1 x 10
-4
Torr.  These pumps are used for scientific primary pumping applications.
The
D75 vacuum pump
is a light weight belt drive rotary vane mechanical vacuum pump with a 1/3 hp motor.  It is reliable and operates at temperatures up to 65°C
.
Precision D75 Vacuum Pump Applications:
Laboratory Bench Top Vacuum Processes
Leak Detection
Research & Development
Analytical Instruments
Evacuation of Vessels
Laboratory Experimentation
Precision D75 Vacuum Pump Features:
Belt drive pump
Light weight
antiback-up valve prevents oil backups
Reliability and long life
Precision Vacuum Pump Specifications:
Free Air Displacement (CFM): 2.6 Liters / Min (73.6 L/M)
Stage: 2
Phase: 1
HP: 1/3
Oil Capacity: 1 Quart
Ultimate Vacuum Microns (Torr): 0.1 (1 x 10 -4)
Pumping Speed at CFM: 1 Micron, 1.51 CFM (42.8 Liters / Min)
Pumping Efficiency at: 1 Micron (57%)
Operating Temperature: +/- 10 Degrees C 65 Degrees C
Intake Tubing I.D. Inches (mm): 3/4" (19mm)
Exhaust Diameter (NPT) Inches: 3/4
Pumping Speed RPM: 600
Net Weight: 76 Lbs
Please use the shipping calculator to determine shipping.
Check out my
other items
!
If you receive your item and it is not to your 100 Percent Satisfaction, please contact us before leaving feedback.
I strive to make sure every transaction is a positive one!
IF you have a problem with my item, I would like you to use the "Contact Seller" link in the listing, or call me. Please don't open a case. Cases count against me even if they are resolved.
I stand behind my items and will work out any problems that you may have with an item.
So please contact me if you have a problem with an item I have sold you and don't use the eBay Case as a means of communication.
International Buyers, Please Note: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as "gifts". US and International government regulations prohibit such behavior.
Powered by SixBit's eCommerce Solution