Toshiba BU238MCF USB3 Machine Vision Camera with Sony IMX174LQJ Sensor

Description

Toshiba BU238MCF USB3 Machine Vision Camera with Sony IMX174LQJ Sensor. Condition is "Used". Shipped with USPS Priority Mail.
Some cosmetic wear but works perfectly.  See pictures for condition.
Manufacturer Details: https://www.toshiba-teli.co.jp/en/products/industrial-camera/usb-camera-bu238m.htm
BU238MCF
USB3
2.3 MP
1/2 type
GS-CMOS
B/W / Color
165 fps
TeliCore
Bus synchronization
Bulk trigger
image buffer
Sequential Shutter
1.1μs exposure
This BU series is an integrated-(one-body)-type camera that adopts all pixel data readout inter line CCD or CMOS.
For video output and camera control, the USB3.1 Gen1 (USB3.0) interface standard is adopted for high transfer rate, and it is easy to integrate into industrial equipment.
Model
BU238MCF
Interface
USB3.1 Gen1 (USB3.0) (Only SuperSpeed is supported)
Pixels
2.3M
Imager
CMOS image sensor
Imager model
IMX174LQJ
Resolution
1,920(H) x 1,200(V)
Frame rate
165fps (Bayer 8bit)
Pixel size
5.86μm x 5.86μm
Scanning area
11.25mm(H) x 7.03mm(V)
Image size
1/1.2 type
Aspect ratio
16:10
Scanning
Progressive
Electronic shutter method
MANUAL : Global shutter / Random Trigger Shutter : Global shutter
Random Trigger Shutter Type
External Trigger / Software Trigger
Random Trigger Shutter Mode
Edge / Level / Bulk (255 times)
Sequential Shutter
16 entries (max)
Exposure Time
MANUAL : 30μs to 16s
Random Trigger Shutter : 30μs to 16s (Edge or Bulk mode), 50μs to Trigger width (Level mode)
Synchronization System
Internal / Bus (USB)
On-chip Color Filter
RGB primary color mosaic-on-tip color filter
Optical glass/filter
IR Cut Filter
Sensitivity
4,100 lx
(F8, 1/200s)
Minimum illuminance
9 lx
(F1.4, Gain: +18dB, Video level: 50%)
Gain
MANUAL : -6 to +18dB
Black Level
-25% to +25%
Gamma / LUT
γ=1.0 to 0.45 / In 10bit, Out 10bit
White balance
Manual white-balance / One-push white-balance
Image Buffer
256MB / 204 frames (all pixels readout)
Image Output Format
Bayer 8bit
Readout Mode
All pixel, Scalable, Mirroring, Flip
External trigger input
Low: 0 to 0.5V, High: 2 to 24.0V
High active / Low active, Pulse width: 50μs (minimum)
Power supply
DC5V±5%
Power consumption
2.9W max.
Lens mount
C-mount
External dimension
29(W) x 29(H) x 16(D) mm (Not including protruding parts)
Mass
approx. 32g
Operation temperature
0℃ to 40℃ (below 50℃ on cabinet surface)
Operation humidity
10% to 90% (no condensation)
Conformity
CE, FCC, RoHS, WEEE, USB3 Vision, GenICam, IIDC2